yum install rp-pppoe -y 安裝pppoe
yum erase NetworkManager -y 移除NetworkManager
pppoe-setup 設定pppoe
Enter your Login Name (default root): 撥接帳號@ip.hinet.net
Enter the Ethernet interface connected to the PPPoE modem
For Solaris, this is likely to be something like /dev/hme0.
For Linux, it will be ethX, where 'X' is a number.
(default eth0): eno16777736 網卡代號
Do you want the link to come up on demand, or stay up continuously?
If you want it to come up on demand, enter the idle time in seconds
after which the link should be dropped. If you want the link to
stay up permanently, enter 'no' (two letters, lower-case.)
NOTE: Demand-activated links do not interact well with dynamic IP
addresses. You may have some problems with demand-activated links.
Enter the demand value (default no): no 默認
DNS
Please enter the IP address of your ISP's primary DNS server.
If your ISP claims that 'the server will provide dynamic DNS addresses',
enter 'server' (all lower-case) here.
If you just press enter, I will assume you know what you are
doing and not modify your DNS setup.
Enter the DNS information here: 168.95.1.1 伺服器DNS位址1
Please enter the IP address of your ISP's secondary DNS server.
If you just press enter, I will assume there is only one DNS server.
Enter the secondary DNS server address here: 168.95.192.1 伺服器DNS位址2
PASSWORD
Please enter your Password: 撥接密碼（在這裡輸入過程不會出現星號）
Please re-enter your Password: 撥接密碼（在這裡輸入過程不會出現星號）
USERCTRL
Please enter 'yes' (three letters, lower-case.) if you want to allow
normal user to start or stop DSL connection (default yes): no 不要讓一般使用者去控制連線
FIREWALLING
Please choose the firewall rules to use. Note that these rules are
very basic. You are strongly encouraged to use a more sophisticated
firewall setup; however, these will provide basic security. If you
are running any servers on your machine, you must choose 'NONE' and
set up firewalling yourself. Otherwise, the firewall rules will deny
access to all standard servers like Web, e-mail, ftp, etc. If you
are using SSH, the rules will block outgoing SSH connections which
allocate a privileged source port.
The firewall choices are:
0 - NONE: This script will not set any firewall rules. You are responsible
for ensuring the security of your machine. You are STRONGLY
recommended to use some kind of firewall rules.
1 - STANDALONE: Appropriate for a basic stand-alone web-surfing workstation
2 - MASQUERADE: Appropriate for a machine acting as an Internet gateway
for a LAN
Choose a type of firewall (0-2): 0 暫時先選0，防火牆的部分由我們手動設定
Do you want to start this connection at boot time?
Please enter no or yes (default no): yes 開機時自動連線
** Summary of what you entered **
Ethernet Interface: eno16777736
User name: 撥接帳號@ip.hinet.net
Activate-on-demand: No
Primary DNS: 168.95.1.1
Secondary DNS: 168.95.192.1
Firewalling: NONE
User Control: no
Accept these settings and adjust configuration files (y/n)? y 核對資料無誤
Adjusting /etc/sysconfig/network-scripts/ifcfg-ppp0
Adjusting /etc/resolv.conf
(But first backing it up to /etc/resolv.conf.bak)
Adjusting /etc/ppp/chap-secrets and /etc/ppp/pap-secrets
(But first backing it up to /etc/ppp/chap-secrets.bak)
(But first backing it up to /etc/ppp/pap-secrets.bak)
Congratulations, it should be all set up!
Type '/sbin/ifup ppp0' to bring up your xDSL link and '/sbin/ifdown ppp0'
to bring it down.
Type '/sbin/pppoe-status /etc/sysconfig/network-scripts/ifcfg-ppp0'
to see the link status.
/sbin/ifup ppp0 連線
/sbin/ifdown ppp0 斷線
/sbin/pppoe-status 檢查目前狀態
※名稱解析的部份，則是開啟『vi /etc/resolv.conf』檔案
nameserver 168.95.1.1
nameserver 168.95.192.1
沒有留言:
張貼留言